GB/T 26127-2010 车用压缩煤层气

作者:标准资料网 时间:2024-05-11 19:16:26   浏览:9372   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:车用压缩煤层气
英文名称:Compressed coalbed methane as vehicle fuel
中标分类: 矿业 >> 固体燃料矿 >> 固体燃料矿综合
ICS分类: 石油及相关技术 >> 燃料
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2011-01-14
实施日期:2011-06-01
首发日期:2011-01-14
作废日期:
主管部门:全国煤炭标准化技术委员会(SAC/TC 42)
提出单位:中国煤炭工业协会
归口单位:全国煤炭标准化技术委员会(SAC/TC 42)
起草单位:山西晋城无烟煤矿业集团有限责任公司、中国石油大学(北京)、山西省质量技术监督局、西安科技大学、沁水蓝焰煤层气有限责任公司
起草人:朱晓明、杨茂林、李国彪、王保玉、张遂安、冉春生、田永东、白建平、马东民、王晋萍
出版社:中国标准出版社
出版日期:2011-06-01
页数:8页
适用范围

本标准规定了车用压缩煤层气的术语和定义、质量要求、检验方法、标识与储存。
本标准适用于压力不大于20MPa的作为车用燃料的压缩煤层气。

前言

没有内容

目录

没有内容

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB/T11060.2 天然气 含硫化合物的测定 第2部分:用亚甲蓝法测定硫化氢含量
GB/T11061 天然气中总硫的测定 氧化微库仑法
GB/T11062 天然气发热量、密度、相对密度和沃泊指数的计算方法
GB/T13609 天然气取样导则
GB/T13610 天然气的组成分析 气相色谱法
GB17258 汽车用压缩天然气钢瓶
GB/T17283 天然气水露点的测定 冷却镜面凝析湿度计法
GB/T18605.2 天然气中硫化氢含量的测定 第2部分:醋酸铅反应速率单光路检测法
TSGR0004 《固定式压力容器安全技术监察规程》
《气瓶安全监察规程》劳动部【劳】锅字(1989)12号

所属分类: 矿业 固体燃料矿 固体燃料矿综合 石油及相关技术 燃料
下载地址: 点击此处下载
Product Code:SAE J1516
Title:Accommodation Tool Reference Point
Issuing Committee:Truck And Bus Human Factors Committee
Scope:Reference lines have been developed to which driver workspace accomodation tools can be located in vehicle space. The lines describe horizontal reference point locations as a function of vehicle H-point height (H30). One reference line has been established for use in vehicles with H-point heights (H30) and steering wheel diameters (W9) less than 405 and 450 mm, respectively. (Class A Vehicles) This point can be used to reference appropriate workspace tools to accommodate a driver population with a male-to-female ratio of one-to-one. Separate reference lines have been established for use in vehicles with H-point heights (H30) between 405 and 530 mm and steering wheel diameters (W9) between 450 and 560 mm with treadle type pedals. (Class B Vehicles) See Figure 1. Three lines are available for use in Class B vehicles depending on the percentages of males and females in the population the designer wishes to accommodate. Separate points can be used to reference appropriate workspace tools to accommodate driver populations with male-to-female ratios of 50:50, 75:25, and 90:10 to 95:5. Different procedures for locating Class A and Class B accommodation tool reference lines in vehicle space have been established based on unique packaging considerations of the two categories of vehicles. tools to accommodate driver populations with male-to-female ratios of 50:50, 75:25, and 90:10 to 95:5. Different procedures for locating Class A and Class B accommodation tool reference lines in vehicle space have been established based on unique packaging considerations of the two categories of vehicles.【英文标准名称】:Waterbasedsurfaceembeddedheatingandcoolingsystems-Part2:Floorheating:Provemethodsforthedeterminationofthethermaloutputusingcalculationandtestmethods;EnglishversionofDINEN1264-2:2009-01
【原文标准名称】:内部水基表面加热和冷却系统.第2部分:地板加热:用计算和试验方法测定热输出的检验法
【标准号】:DINEN1264-2-2009
【标准状态】:现行
【国别】:德国
【发布日期】:2009-01
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:室温;认可实验室;建筑物;顶棚;集中供暖;冷却系统;测定;家用设施;实验的;热传导;热力工程;热流;热流密度;加热系统;加热设备;加热装置;加热技术;热水集中供暖;影响因素;数学计算;计算方法;办公楼;管道敷设;额定值;找平层;系统;试验;导热性;热效率;热环境系统;热输出;热阻;地板下供暖;墙;温水
【英文主题词】:Ambienttemperatures;Approvallaboratories;Buildings;Ceilings;Centralheating;Coolingsystems;Determination;Domesticfacilities;Experimental;Heatconduction;Heatengineering;Heatflow;Heatflowdensity;Heatedsystems;Heatingequipment;Heatinginstallations;Heatingtechnics;Hot-watercentralheating;Influencefactors;Mathematicalcalculations;Methodsofcalculation;Officebuildings;Pipelaying;Ratings;Screeds(floors);Systems;Testing;Thermalconductivity;Thermalefficiency;Thermalenvironmentsystems;Thermaloutput;Thermalresistance;Underfloorheating;Walls;Warmwater
【摘要】:ThisEuropeanStandardspecifiestheboundaryconditionsandtheprovemethodsforthedeterminationofthethermaloutputofhotwaterfloorheatingsystemsasafunctionofthetemperaturedifferencebetweentheheatingmediumandtheroomtemperature.Thisstandardshallbeappliedtocommercialtradeandpracticalengineeringifprovedandcertifiablevaluesofthethermaloutputshallbeused.ThisEuropeanStandardappliestoheatingandcoolingsystemsembeddedintotheenclosuresurfacesoftheroomtobeheatedortobecooled.ThisPartofthisEuropeanStandardappliestohotwaterfloorheatingsystems.ApplyingofPart5ofthisEuropeanStandardrequirestheprioruseofthisPartofthisEuropeanStandard.Part5ofthisEuropeanStandarddealswiththeconversionofthethermaloutputoffloorheatingsystemsdeterminedinPart2intothethermaloutputofheatingsurfacesembeddedinwallsandceilingsaswellasintothethermaloutputofcoolingsurfacesembeddedinfloors,wallsandceilings.Thethermaloutputisprovedbyacalculationmethod(Clause6)andbyatestmethod(Clause9).ThecalculationmethodisapplicabletosystemscorrespondingtothedefinitionsinEN1264-1(typeA,typeB,typeC,typeD).Forsystemsnotcorrespondingtothesedefinitions,thetestmethodshallbeused.Thecalculationmethodandthetestmethodareconsistentwitheachotherandprovidecorrelatingandadequateproveresults.Theproveresults,expresseddependingonfurtherparameters,arethestandardspecificthermaloutputandtheassociatedstandardtemperaturedifferencebetweentheheatingmediumandtheroomtemperatureaswellasfieldsofcharacteristiccurvesshowingtherelationshipbetweenthespecificthermaloutputandthetemperaturedifferencebetweentheheatingmediumandtheroom.
【中国标准分类号】:Q76
【国际标准分类号】:91_140_10
【页数】:47P.;A4
【正文语种】:英语